

Your name:



Your Country



Your email address:



Your phone number:



Equipment Desired:

Please Contact us below if you would like additional information, or
send us an e-mail at Dave@Sirgen.com or call us at 770-715-5442

Surplus Generation Equipment, LLC, Brokering the following surplus equipment: Natural gas generator, nat gas generator, micon wind turbine, Gas Turbine, Frame 3 Turbine, Frame 5 Turbine, Frame 7 Turbine, Frame 9 Turbine, 7ea Turbine, 7fa Turbine, LM2500 Turbine, LM5000 Turbine, LM6000
Turbine, Siemens 501 Turbine, GE Turbine, Alstom Turbine, Solar Turbine, Rolls Royce Turbine, Mitsubishi Turbine, Westinghouse Turbine, Solar Taurus Turbine, Solar Mars Turbine, Solar Centaur Turbine, Solar Tornado Turbine, Steam Turbine, Gas Turbine, Used Steam Turbine, Surplus
Steam Turbine, Used Gas Turbine, Surplus Gas Turbine, Simple Cycle Turbine, 10MW Turbine Generator, 20MW Turbine Generator, 30MW Turbine Generator, 40MW Turbine Generator, 50MW Turbine Generator, 60MW Turbine Generator, 70MW Turbine Generator, 80MW Turbine Generator,
Warstsila, Caterpillar, Diesel Generator, Diesel Genset, Natural Gas Generator, Natgas Generator, Natgas genset, Jenbacher, Jenbacker, Cooper, Cooper Superior, Compressor, Cooling Tower, Wind Turbine, Micon, Micon Wind Turbine, Vestas, Vestas Wind Turbine, Deutz, Deutz generator,
Used Wind Turbine, Used Diesel Generator, Wartsila

Power Plants

Power Barges

Gas Turbines

Steam Turbines

Diesel Gensets

Gas Gensets

Wind Turbines

Compressors

Cooling Towers

Excitation Systems

Search Site For
Manufacturer

Surplus Generation Equipment

Providing Surplus & Used Power
Generation Equipment Worldwide

General Electric LM5000 Gas Turbine - 34 MW

GE LM5000 Gas Turbine

The LM5000 CTG is a dual fuel steam injected (STIG), water injected (NOx) General Electric gas turbine packaged
by Stewart & Stevenson. The CTG is designed to generate 3 phase, 60 Hz power at 13.8 kV at ambient
temperatures 0-90 F. The unit has a nominal power output of 34 MW without steam injection and a nominal power
output of 48 MW with steam injection. The CTG is designed to operate on natural gas or No. 2 fuel oil.
Water injection is utilized to reduce exhaust emissions of nitrogen oxides to 60 ppmvd
(15% O2) for natural gas and 84 ppmvd for No. 2 fuel oil. The CTG control system is
designed to interface with the facility Bailey Infi-90 DCS.
The LM5000 CTG system consists of the combustion turbine, the generator and the
following subsystems:
AC Generator
Turbine Lube Oil System
Turbine Hydraulic System
Generator Lube Oil System
Dual-Fuel Water Injection System
CDP Steam System
Exhaust Collector Drain System
Combustion and Ventilation Air Filtration
Hydraulic Start System
Turbine Water Wash System
Fire & Gas Protection System
Electronic Control System
Generator Excitation System
Vibration Monitoring System

Generators

Xfmr