Your name:
Your Country
Your email address:
Your phone number:
Equipment Desired:
Please Contact us below if you would like additional information, or
send us an e-mail at Dave@Sirgen.com or call us at 770-715-5442
Surplus Generation Equipment, LLC,  Brokering the following surplus equipment:  Natural gas generator, nat gas generator, micon wind turbine, Gas Turbine, Frame 3 Turbine, Frame 5 Turbine, Frame 7 Turbine, Frame 9 Turbine, 7ea Turbine, 7fa Turbine, LM2500 Turbine, LM5000 Turbine, LM6000
Turbine, Siemens 501 Turbine, GE Turbine, Alstom Turbine, Solar Turbine, Rolls Royce Turbine, Mitsubishi Turbine, Westinghouse Turbine, Solar Taurus Turbine, Solar Mars Turbine, Solar Centaur Turbine, Solar Tornado Turbine, Steam Turbine, Gas Turbine, Used Steam Turbine, Surplus
Steam Turbine, Used Gas Turbine, Surplus Gas Turbine, Simple Cycle Turbine, 10MW Turbine Generator, 20MW Turbine Generator, 30MW Turbine Generator, 40MW Turbine Generator, 50MW Turbine Generator, 60MW Turbine Generator, 70MW Turbine Generator, 80MW Turbine Generator,
Warstsila, Caterpillar, Diesel Generator, Diesel Genset, Natural Gas Generator, Natgas Generator, Natgas genset, Jenbacher, Jenbacker, Cooper, Cooper Superior, Compressor, Cooling Tower, Wind Turbine, Micon, Micon Wind Turbine, Vestas, Vestas Wind Turbine, Deutz, Deutz generator,
Used Wind Turbine, Used Diesel Generator, Wartsila
Search Site For
Manufacturer
Surplus Generation Equipment  
Providing Surplus & Used Power
Generation Equipment Worldwide

General Electric LM2500 PE Gas Turbine

GE LM2500 PE Gas Turbine

                                                                GE LM2500 GAS TURBINE

The LM2500 CTG is a dual fuel, water injected (NOx) General Electric gas turbine packaged by Stewart & Stevenson. The CTG is designed to
generate 3 phase, 60 Hz power at 13.8 kV at ambient temperatures 0-90 F. The unit has a nominal power output of 22 MW. The CTG is designed to
operate on natural gas or No. 2 fuel oil. Water injection is utilized to reduce exhaust emissions of nitrogen oxides to 60 ppmvd (15% O2) for natural
gas and 84 ppmvd for No. 2 fuel oil. The CTG control system is designed to interface with the facility Bailey Infi-90 DCS.

The LM2500 CTG system consists of the combustion turbine, the generator and the following subsystems:

             AC Generator
             Turbine Lube Oil System
             Turbine Hydraulic System
             Generator Lube Oil System
             Dual-Fuel Water Injection System
             Exhaust Collector Drain System
             Combustion and Ventilation Air Filtration
             Hydraulic Start System
             Turbine Water Wash System
             Fire & Gas Protection System
             Electronic Control System
             Generator Excitation System
             Vibration Monitoring System

The CTG package consists of a main skid which houses the combustion turbine generator set with on-board support subsystems. The main CTG
skid contains the combustion turbine generator set and the support subsystems for combustion and ventilation air filtration, fuel and lubricating oil
supply, fire protection, vibration monitoring, turbine water wash, and turbine exhaust emission control. The entire skid is enclosed in an acoustical
enclosure for noise abatement. Auxiliary skids are included for off-line water washing, liquid fuel supply, lube oil cooling and hydraulic engine
starting. An operator control panel, a motor control center, protective relays and a 24-volt battery system are provided as off-skid items.

The combustion and ventilation air filtration system is a modular air filter assembly consisting of two filter modules containing trash screen,
anti-icing coils, prefilters, evaporative coolers, drift eliminator panels and high efficiency barrier filters. The filter modules supply conditioned air to
a common plenum, which then passes thru a silencer to the turbine bellmouth, turbine compartment and generator compartment.




Manufacturer & Model                        General Electric LM2500-PE-MDW04
Power Turbine                                      General Electric        
Normal Power Turbine RPM              3600 rpm
Start System                                         Hydraulic, variable speed
Vibration Monitoring                            Bentley Nevada 7200 Series
Fire Protection                                       Wilson Fire protection System with Delphian Gas Sensors and CO2 Fire Suppression        

AC Generator                                        Brush Electric Machines BDAX7-167E
Machine Number                                 61425A-8G
Power Factor                                        0.9
Voltage                                                  13.8 kV
Frequency                                             60 Hz, 3-phase, Wye Connection
Cooling                                                  Air Cooled
Brushless Excitation System          Brush MAVR
Rating                                                    27359 kVA
Amps                                                    1144

External Turbine Lube Oil System      
Shell and tube heat exchanger with customer supplied cooling water
150 Gallon reservoir capacity

Generator Lube Oil System        Generator driven main pump, AC motor driven auxiliary pump, rundown tanks
     Shell and tube heat exchanger with customer supplied cooling water
     215 Gallon reservoir capacity
     Motor driven pump capacity 40 GPM at 1200 RPM


The CTG and accessories are controlled by a Woodward Model 501 Digital Control
System which is housed in the Turbine Control Panel (TCP). The TCP consists of five
off-skid cubicles performing the functions of generator metering (Woodward DSM
Synchronizer), excitation, turbine control, status monitoring, and electronic control.